Folding 2 blades propellers
By now everybody knows about the function of the folding blades propeller for sailing hulls is:
TO REDUCING THE PROPELLER DRAG DURING SAILING
(propeller drag is reduced about 90% compared to the traditional two fixed blades propeller).
The opening operation is automatic and is caused by the centrifugal force, increasing according to the engine revolution. In forward gear the pressure on the blades allows a performance equal to the fixed-blades propeller.
During this opening phase a quick acceleration of the engine is not advisable, and we recommend to make it smoothly and gradually.
Even at low revolutions the centrifugal force is enough to opening the blades.
When the engine is off, a forward speed of 1 to 2 knots generates sufficient water pressure for the blades to close.
Reverse gear has always been the main problem for folding blades propellers.
Mainly due to the water pressure acting in opposition to the blades opening and the lack of a support point for the blades on the hub, only partially open, and the blades float, causing an unstable and insecure condition when maneuvering.
In order to avoid this inconvenience we studied and testedspecial blade sectionsthat allow the blades to remain fully open during reverse operation with positive maneuvering results.
Our folding propellers are:
- Made in series in a wide range of right hand and left hand rotation that will suit any hull and engine.
- Manufactured with accuracy and dinamically balanced.
If well chosen, in addition to the best performance, they will eliminate any vibration and noise.
- Mounted with blades coupling by means of gears that ensure a balanced opening and perfect closing during sailing.
Working tollerance: ISO 484 – class 1°
- OTMAN alloy
mechanical resistance= R 535 N/mm.2
yelding= S 220 N/mm2
elongation= As 25%